W2K STOP errors.

29 Mar 2005 8:29 PM

trapper1950@hotmail.com

STOP: 0x0000001E (0xC0000005,0xBFF3A129,0x00000000,0x00000000) address
BFF3A129 base at BFF38000 DateStamp 3c4c5fb6 - BoBack2K.s7s

I used the repair console to disable goback2k (which found but didn't change
the registry entry). Re-boot returned following error

0x0000007B (0xEB41B84C,0xC0000034,0x00000000,0x00000000)
INACCESSIBLE_BOOT_DEVICE

Any suggestions as to what I might try next to eliminate these errors?

(running quick repair hasn't helped)

30 Mar 2005 4:13 AM

Dave Patrick

"| I used the repair console to disable goback2k (which found but didn't
change

| the registry entry). Re-boot returned following error"

Details may help.

"| 0x0000007B "

Try creating a boot disk. For the floppy to successfully boot Windows 2000
the disk must contain the "NT" boot sector. Format a diskette (on a Windows
2000 machine, not a DOS/Win9x, so the NT boot sector gets written to the
floppy), and copy Windows 2000 versions of ntldr, ntdetect.com, and boot.ini
to it. Edit the boot.ini to give it a correct ARC path for the machine you
wish to boot. Below is an example of boot.ini. The default is to start the
operating system located on the first partition of the primary or first
drive (drive0). Then drive0 partition 2 and so on.

[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows 2000 0,1"
multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 0,2"
multi(0)disk(0)rdisk(1)partition(1)\WINNT="Windows 2000 1,1"
multi(0)disk(0)rdisk(1)partition(2)\WINNT="Windows 2000 1,2"

Another possibility is to try loading the controller driver also from
floppy. For the floppy to successfully boot Windows 2000 the disk must
contain the "NT" boot sector. Format a diskette (on a Windows 2000 machine,
not a DOS/Win9x, so the "NT" boot sector gets written to the floppy), then
copy ntldr, ntdetect.com, and boot.ini to it. Edit the boot.ini to give it a
correct ARC path for the machine you wish to boot.

In order for this to work you'll want to change the arc path in boot.ini
from multi syntax to scsi syntax to indicate that Windows 2000 will load a
boot device driver and use that driver to access the boot partition. Then
also copy the correct manufacturer SCSI, or ultra DMA, or ATA100, or raid,
or serial ATA driver to the floppy but renamed to ntbootdd.sys

Something like this below;

[boot loader]
timeout=10
default=scsi(0)disk(0)rdisk(0)partition(1)\winnt
[operating systems]
scsi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows 2000 0,1"
scsi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 0,2"
scsi(0)disk(1)rdisk(0)partition(1)\WINNT="Windows 2000 1,1"
scsi(0)disk(1)rdisk(0)partition(2)\WINNT="Windows 2000 1,2"

Another option is a parallel install.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

Show quoteHide quote

"trapper1***@hotmail.com" wrote:
| STOP: 0x0000001E (0xC0000005,0xBFF3A129,0x00000000,0x00000000) address
| BFF3A129 base at BFF38000 DateStamp 3c4c5fb6 - BoBack2K.s7s
|
| I used the repair console to disable goback2k (which found but didn't
change
| the registry entry). Re-boot returned following error
|
| 0x0000007B (0xEB41B84C,0xC0000034,0x00000000,0x00000000)
| INACCESSIBLE_BOOT_DEVICE
|
| Any suggestions as to what I might try next to eliminate these errors?
|
| (running quick repair hasn't helped)